Water rising in your crawl space or basement? We install and repair sump pumps that work the first time, with a real plumber on site within 45 minutes.
Water pooling in your crawl space or basement is a sign your sump pump isn't keeping up, or it's failed altogether. Watsonville sits close enough to the Pajaro River and coastal areas that spring runoff and heavy rains can push groundwater up through your foundation faster than most homeowners expect. A working sump pump catches that water, pumps it away from the house, and keeps your foundation dry.
When a sump pump quits, you'll usually notice water starting to pool in low spots or a backup smell coming from the pit. We'll inspect the pump itself, check the discharge line for clogs or backflow, test the float switch, and look at the pit to see if it's sized right for your property. If the pump is worn out or undersized, we replace it with a unit rated for your home's water load. If the discharge is running toward the house instead of away, we fix that too.
Homes around Watsonville, Freedom, Corralitos, and the coastal zones like Aptos and La Selva Beach all deal with high water tables, especially after our wet months. A sump pump isn't a luxury in these areas. It's the difference between a dry basement and one that floods every few years. We make sure the pump sits in a clean pit, the float operates freely, and the discharge line carries water well away from your foundation.
When to call us
Water pooling in your crawl space or basement
Sump pump running constantly or not running at all
Musty smell coming from the sump pit
Water backing up toward the house instead of away
Pump making loud grinding or rattling noises
Foundation or basement walls showing moisture or stains
Sump pumps & flood control jobs we handle in Watsonville
Full pump inspection and float switch test
Pump replacement with proper sizing for your home
Discharge line clearing and rerouting if needed
Backflow preventer installation to stop reverse flow
Pit cleaning and debris removal
Check valve inspection to prevent water from flowing back
Not sure which one you need? Call and describe what's going on. We'll confirm the scope and give you a free, no-obligation quote before any work starts.
Common questions
How do I know if my sump pump is failing?
If water is pooling in your basement or crawl space, or the pump is running constantly but not keeping up with the water, it's failing. A sump pump should only run when water reaches the float, then shut off once the pit is empty. If it never shuts off or doesn't run at all when water is present, call us to inspect it.
How often should a sump pump be replaced?
Most sump pumps last seven to ten years, depending on how often they run. If your pump is older than that or it's running constantly during wet season, replacement is cheaper than emergency water damage. We'll tell you whether yours can be repaired or needs to be swapped out.
What's the difference between sump pump and drainage?
A sump pump is one piece of a complete flood control system. We also inspect your gutters, grading around the foundation, and perimeter drainage to make sure water is flowing away from the house before it ever reaches the sump pit. The pump is the last line of defense, not the first.
Can I install a sump pump myself?
You can, but most plumbing codes in our area require a licensed plumber to do it, and the pit needs to be the right size and placed correctly to work. If the pump isn't hooked up right or the discharge line is wrong, you'll have water in your basement anyway. We handle permits, sizing, and installation so it works from day one.